Alpha Technologies IP Bell - 02C Instrucciones de operaciones descargar pdf (Pagina 36)

IPDP - installation and operating instructions

delay” and after that is activated Relay 2 automatically for certain time

“time closing 2”. Then Door phone hangs up.

Note: The only relay 1 can be activated from phone and all sequence started.

Besides that the relay 2 can be separately activated from buttons by password.

2. Password (code) to activate relays from Door phone ( by buttons), [2 to 6

digits]. There is totally 6x codes which are control by DAY/NIGHT mode

setting. The code is inserting by Door phone buttons combination ( 1 or 2

buttons only). Relay activation is influenced by programmed relay mode as

same as DAY/NIGHT mode. When you use mode of dial “ 2 groups” the

door phone is permanently in mode DAY.

3. Code by phone for relay activation [2 digits]. You can programm the same

code for both relays. Then both relays will be activated at the same time

when you dial the code. We recommend to programm the same code for

relay activation as same as door phone hanging up (page 33).

4. Closing time for which is relay activated (on) [2 digits, 01-99]

5. Permitt / Prohibit to control relay during incoming call.

6. Delay time between activation relay 1 and relay 2 when is used mode 5 at

relay 2, m=5 (gradual opening) , [2 digits 01-99]

7. Default – factory setting. After making changes click on button „ save

changes

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 42 43

Sin comentarios

Alpha Technologies IP Bell - 02C Instrucciones de operaciones Pagina 36