Alpha-technologies APU Control Module (ACM) Manual de usuario descargar pdf (Pagina 12)

018-340-B0-001 Rev. A

2.0 Installation, Conﬁ guration and System Interface, continued

2.2 ACM-96 and ACM-96G

2.2.1 A2304 Generator Controller Conﬁ guration

1. The A2034 logic board is located in the electronics compartment of the APU

enclosure. Locate the 4-position Dip Switch and set switch 2 in the OFF position.

For the new conﬁ guration, switches 1 and 3 should be on, and switches 2 and 4

should be off.

2. Remove the Y alarms harness and connect the 15 pin male mini mate-n-lock

connector directly to J2 of the 704-619 board.

3. Install provided alarm jumper to J4 of the A2034 logic board.

Fig. 2-2, A2304 Dip Switch Conﬁ guration

Fig. 2-3, Y Alarms Harness

Fig. 2-4, Alarms Jumper

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 29 30

Sin comentarios

Alpha-technologies APU Control Module (ACM) Manual de usuario Pagina 12