Alpha-technologies FLEXNET POWER MPS48-7M Manual de usuario descargar pdf (Pagina 16)

16 021-511-B4-002, Rev. B

4.0 Installation, continued

4.3 Enclosure Installation, Steel or Concrete Pole

To mount the MPS48-7M on concrete or steel poles, two user-supplied mounting straps

are required (straps must be stainless, galvanized, or equivalent). Most codes require the

base of the enclosure to be located a minimum height from the ground. Always verify height

restrictions before installation.

Before installing an enclosure, the location and method of mounting must be approved by the property owner.

ATTENTION:

3. Secure the enclosure to the bracket using the four self-

tapping screws with washers (supplied).

Required Tools and Materials:

• #2 Phillips screwdriver

• Two user-supplied pole straps to ﬁ t pole (straps must be

stainless, galvanized or equivalent)

Installation Procedure:

1. Position the bracket at the appropriate height with the tab

facing up. Secure it to the pole using the pole straps.

2. Hang the enclosure on the bracket.

Tab

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 26 27

Sin comentarios

Alpha-technologies FLEXNET POWER MPS48-7M Manual de usuario Pagina 16