Alpha-technologies Cordex Controller Panel Mount_Rack Mount Manual de usuario descargar pdf (Pagina 13)

Argus Technologies Ltd. 018-587-C0 Rev A WC

Latch

Touch Screen

LEDs

RS-232 (Craft Port)

Reset Button

Figure 3–Front view of Cordex controller panel model CXCP, gray finish

2.1.6 Front Panel LEDs

The CXC has three LEDs located on the front panel. These are used to display the alarm status of the power

system, CXC progress and status during startup and file transfers.

2.1.6.1 Alarm Conditions

The CXC illuminates the LED that corresponds to the system alarm status. The following show

the corresponding alarm status for each LED color:

Green – No alarms present

Yellow – Minor alarm is present (no major alarms)

Red – Major alarm is present.

Only one LED is illuminated at a time during alarm conditions.

2.1.6.2 Progress and Status Indication

The LEDs are also used in the following situations:

Base unit validation – all three LEDs are on at the same time.

File transfer – when recovering from invalid firmware application – the red LED is illuminated.

2.2 Serial Ports

2.2.1 CAN (Option)

A single CAN Serial port, for communications with Argus’ Cordex model rectifiers and other CAN-enabled

equipment, is located in between the Ethernet port and RS-485 port options.

2.2.2 Ethernet (Option)

One 10/100 Base T Ethernet port is provided for CXC communications with a local area network (LAN), e.g. the

Internet.

2.2.3 RS-485 (Option)

One RS-485 Serial port, utilizing a RJ-type connector, is provided on the CXC for communications with a variety

of system components including, but not limited to, Argus Pathfinder series high capacity rectifiers.

2.3 Real Time Clock

The CXC contains a real time clock (Y2K compliant), which allows time stamps to be placed on alarm, and

statistical events contained in the historical data files.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 39 40

Sin comentarios

Alpha-technologies Cordex Controller Panel Mount_Rack Mount Manual de usuario Pagina 13