Alpha Technologies IPDP - 00C Manual de usuario

ALPHATECH TECHNOLOGIES s.r.o. Jeremenkova 88, Praha 4, Czech Republic www.alphatechtechnologies.cz Slim Door Phone SlimDoorPhone – 01 SlimDoorPh

10 2.5 Connect the Keyboard Keyboard work as separate code lock, he has connection power supply 12V, inpu

11 3 SlimDoorPhone Services 3.1 Signalling Overview The unit signals acoustic conditions that may occur during operation. You can listen to the sign

12 from the second group (parameter 2). The next press of the same button again selects the number fro

13  If, within the first 10 seconds, the service password is entered, the unit will switch to programming mode and voice communication will cease. 

14 The unit stays inactive in programming mode for 34 seconds and will then automatically hang up. Every time a D

15 5 Parameter description 5.1 Direct Dialling – Memories Parameter Value Description Default 1 t nn… No. nn under button t - t  Button number (mem

16 Parameter Value Description Default 32 hhhhhh External access code in DAY + NIGHT mode - 33 hhhhhh External ac

17 Parameter Value Description Default 38 cc Internal access code 2 impulses 66 cc  command from phone to relay closing [2 digits]  2 impulse

18 Parameter Value Description Default 43 bb End call 55 bb  command for unit hanging up from phone [2 digits

19 Parameter Value Description Default 52 d Maximum call duration 2 d  maximum time in minutes for which a call may last. This time can be exte

2 Contents 1 BASIC DESCRIPTION ...

20 Parameter Value Description Default 57 t DTMF tone duration (ms) 5 (100ms) 58 m Space duration between DTMF t

21 Parameter Value Description Default 5*2 y Frequency of tone detection 4 y  setting range frequency of tone detection from telephone line, value

22 Parameter Value Description Default 81 Deletes all numbers in group 1 (Day mode) 82 Deletes all numbers

23 Parametr Value Description Default 6 z Acoustic signalling 3 and 9 In default the unit produces acoustic signals. It can occasionally cause a prob

24 37 pp Time between 2 impulses 05 38 cc Internal access code 2 impulses 66 39 hhhhhh External access code in D

25 81 Deletes all numbers in group 1 (Day mode) 82 Deletes all numbers in group 2 (Night mode) 83 Default setting only for parameters 3x only

26 6.2 Mechanical dimensions Dimensions WxHxD 104mm x 153mm x 16mm Weight 360g Unit material

27 Internal access code for relay in keyboard 30 2 Dialling type 1 / 0 41 1 Prolong call 42 1 End call 43 2 Password 44 4 DAY MODE switching

28 8 Drilling master board

ALPHATECH TECHNOLOGIES s.r.o. Jeremenkova 88, Praha 4, Czech Republic www.alphatechtechnologies.cz ALPHATECH TECHNOLOGIES s.r.o. Jeremenkova

3 1 Basic description 1.1 Features  Very slim module for surface mounting only. Supplied in 1, 2 or 4 button variants.  Possibility

4 1.2 SlimDoorPhone models Three versions are available plus keyboard :

5 2.1.2 Uncover control elements 4. Push the aluminium speaker grille down (see figure  4). 2.1.3 Wiring and wall mounting 5. Use the wall

6 The wiring of relay contacts is explained in the next picture. The symbol "NO" means contact normally

7 The PCB heating has two major benefits. Firstly, it warms the board during winter time (temperatures under -20 C, most circuits have warranty opera

8 2.2 Location of Doorphone components All mounting, control and setting elements are located under the speaker

9 2.3 Changing name cards Name card panel (2.1.1on page 4) has spaces to insert printed name cards. Insert name cards from top (see picture). Cards