Alpha Technologies IPDP - 00C Manual de usuario Pagina 19

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 29
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 18
19
Parameter
Value
Description
Default
52
d
Maximum call duration
2
d maximum time in minutes for which a call may last.
This time can be extended during a call by dialling
Prolong Call digit from telephone (*
setting is per table.
Parameter
Value
Description
Default
53
w
time between button presses
2
w max. time [sec] between button presses [range 1-9]
- relay closing if time between two next presses is bigger than w
time, the code is not evaluated correctly.
- dialling if the button pressed is the first password number for
switch closing, so the choice is delayed by this w time.
Parameter
Value
Description
Default
54
z
Off hook time before new call
2
z time [sec] for which the unit will hang up, before repeat dialling (button
pressing during call or dialling, busy tone detection) [range 1-5]
Parameter
Value
Description
Default
55
z
Call start time
1
z time [sec] after unit goes off hook before dialling [range 1-5]. This time is
different for each PBX, but most PBXs usually manage to process dialling
up to 2 seconds after line off hook.
Parameter
Value
Description
Default
56
h
Number of rings before hanging up or
group mode switching
12
h specifies the amount of time spent ringing before the unit hangs up and
tries the next number.
time
[min]
choice
0,5
0
1 - 9
1 - 9
15
*
30
#
Vista de pagina 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 28 29

Comentarios a estos manuales

Sin comentarios