
BRAVE – user guide
m=7 permanent closing / opening – usable at versions /C and (C) only, if
switching (DIP 3,4)+par.64. By command for pulse 1 is closed and for
pulses2 is opened. This stage stays in door intercom even after power/line
disconnection. This mode you can use for potting, glasshouse opening,
heating activation etc..
m=8 activated up DAY/NIGHT mode settings - usable at versions /C and (C)
only, if switching (DIP 3,4)+par.64. Version /C allows copying manual
DAY/NIGHT switching only. Version (C) allows copying setting from week
table switching time (when is activated - parametr 084) and then you can
use for example for heating control etc…
button tt start relay closing r in mode m=6
(01-99)
r – relay number [1-2]
tt – button number (memory), always has 2 digits [01-99]
This parametr is for relay mode m=6 only. Value of tt designate from which
button start closing for time t1/t4 of relay r.
In mode DAY + NIGHT password hh... for
relay r, in order p=1-5, for 1 pulse
and p=* for 2 pulses (00-999999)
In mode DAY password hh... for relay r, in
order p=1-5, for 1 pulse and p=* for 2
pulses (00-999999)
In mode NIGHT password hh... for relay r,
in order p=1-5, for 1 pulse and p=* for 2
pulses (00-999999)
r – relay number [1-2]
p – order [1 - 5] for 1 pulse. 5 passswords (external codes) from door
intercom buttons (external code of codelock)
p – order = *, then you can insert just one code (external code) for closing
by 2 pulses
hh... – password (external code) for relay closing from buttons [2 to 6 digits].
Tlačítka 1 - 10 are programmable as numbers 1-0.
Totally 3 x 12 passwords. Controlled by settings DAY/NIGHT.
Combination is inserting by door intercom buttons. Relay closing is influenced
by setup relay mode and switching DAY/NIGHT. When is setup mode 2 groups
of numbers the door intercom is permanently in mode DAY.
You have to keep certain rules for password dialling:
First button of password select from at least used button for direct
dialling (-prolong dial time)
Comentarios a estos manuales